我的購物車
產品簡介/Porduct Introduction
STDE(B)系列熱力膨脹閥是采用技術標準專門設計，適用于空氣調節系統、熱泵、汽車空調、冷水機組、冷藏箱和傳統的制冷系統。
直通閥，與制冷系統的連接方式為釬焊形式。
STDE為標準單向流口形式
STDEB為平衡流口形式，專門為8-19TR而開發的產品，防止冷凝壓力和蒸發負荷的變化而導致靜態過熱度的變化。
可提供K系列、AC系列和N系列三個不同應用溫度范圍的系列產品。
適用于R22，R134a和R407C三種制冷劑。
STDE(B) Series thermal expansion valve adopts the top class technic,is used for air-conditioner system,heat pump,auto air-conditioner,chiller,reefer and traditional refrigeration system.
Throughway Valve,Solder connection
STDE: One-way outfall type
STDEB: Equalization outfall type,developed for 8-19TR to prevent the change of static superheat caused by the change of condensing pressure and evaporating load.
Have K,AC and N series for different temperature range
Suited for R22,R134a and R407C
技術參數/Technical Parameter
感溫包溫度/Max. sensing bulb temperature | 150℃ |
閥體溫度/Max.Valve Body Temperature | 120℃ |
短時閥體溫度//Max. short term Valve Body Temperature | 150℃ |
工作壓力/Max. Work Pressure | 28bar |
試驗壓力/Max.Testing Pressure | 32bar |
MOP 閥
te:蒸發溫度/evaporating temperature
Pe: 蒸發壓力/ evaporating pressure
制冷劑 Refrigerant | K系列 -25℃～+10℃ | AC系列 -10℃～+15℃ |
te＝+15℃/+60℉ | te＝+20℃/+68℉ | |
R22 | Pe＝100psi/6.9bar | Pe＝120psi/8.5bar |
R407C | Pe＝95psi/6.6bar | Pe＝115psi/8.0bar |
R134a | Pe＝55psi/5bar |
|
R22
K＝-25℃～+10℃ MOP100psi/8bar
AC＝-10℃～+15℃ MOP120psi/9bar
N＝-40℃～+10℃
靜態過熱度SS＝4K
流口形式 Outfall Type | 型號 Model | 連接尺寸 進口×出口 Connection Size Inlet×Outlet | 外平衡管尺寸 Equalization connection | 毛細管長度 Capillary Length(m) | 名義制冷量/ Nominal Refrigerating Capacity | |
in | mm | |||||
單向流口 One-way | STDEX3 | 3/8×5/8 | 10×16 | 1/4in/ 6mm | 1.5 | 10.5 |
STDEX3 | 1/2×5/8 | 12×16 | 10.5 | |||
STDEX4 | 1/2×7/8 | 12×22 | 14 | |||
STDEX6 | 1/2×5/8 | 12×16 | 21 | |||
STDEX6 | 1/2×7/8 | 12×22 | 21 | |||
STDEX6 | 5/8×7/8 | 16×22 | 21 | |||
STDEX7.5 | 5/8×7/8 | 16×22 | 26 | |||
STDEX8 | 5/8×7/8 | 16×22 | 28 | |||
STDEX11 | 5/8×7/8 | 16×22 | 38.5 | |||
STDEX11 | 5/8×1-1/8 | 16×28 | 38.5 | |||
STDEX12.5 | 5/8×7/8 | 16×22 | 44 | |||
STDEX12.5 | 5/8×1-1/8 | 16×28 | 44 | |||
STDEX16 | 5/8×1-1/8 | 16×28 | 56 | |||
STDEX16 | 7/8×1-1/8 | 22×28 | 56 | |||
STDEX19 | 7/8×1-1/8 | 22×28 | 66.5 | |||
平衡流口 Equalization | STDEBX8 | 5/8×7/8 | 16×22 | 28 | ||
STDEBX11 | 5/8×7/8 | 16×22 | 38.5 | |||
STDEBX11 | 5/8×1-1/8 | 16×28 | 38.5 | |||
STDEBX12.5 | 5/8×7/8 | 16×22 | 44 | |||
STDEBX12.5 | 5/8×1-1/8 | 16×28 | 44 | |||
STDEBX16 | 5/8×1-1/8 | 16×28 | 56 | |||
STDEBX16 | 7/8×1-1/8 | 22×28 | 56 | |||
STDEBX19 | 7/8×1-1/8 | 22×28 | 66.5 | |||
注：名義制冷量基于冷凝溫度32℃，蒸發溫度5℃。
微信掃一掃
{{item.AppContent}}